Orders may be delayed due to high order volumes and raw material delays
Help & FAQ
Looking for ampacity data or raw metal specifications? You'll find them with our wire gauge charts and technical data on our Resources page.
What is magnet wire?
Magnet wire is copper wire with a thin layer of insulation, and is used in a variety of applications including transformers, wound coils, motors, solenoids, and instruments. Magnet wire is manufactured with insulation materials, specific diameters, and other characteristics called out by the MW 1000 standard per the National Electrical Manufacturers Association (NEMA) For diameters, resistance, and other specifications by gauge, see our magnet wire data charts.
What does AWG mean?
AWG, or American Wire Gauge, is a standardized sizing system for electrically conducting wire. Increasing gauge numbers represent a decrease in wire diameter, so 14 AWG wire is thicker than 30 AWG wire. Our wire gauge charts and technical resources show AWG sizes alongside bare diameter, resistance, and other electrical data.
What wire sizes are available?
Sizes vary by product line. We stock magnet wire from 14 to 44 AWG, and hook-up wire from 8 to 30 AWG, with heavier gauges available in battery cable. Uninsulated wire, including bare copper, tinned copper, nichrome, and stainless steel, is also available in a range of gauges. Full size details are in our magnet wire data, hook-up wire data, and uninsulated wire data charts. Other sizes and colors may be available, so please contact us for any special requirements.
How do I choose the right wire gauge for my amperage?
The right gauge depends on how much current the wire needs to carry, along with the insulation type, installation environment, and wire length. A wire that is too thin for the load can overheat or cause voltage drop. Our hook-up wire ampacity chart shows the current-carrying capacity for each gauge. For application-specific requirements, always check the applicable codes and standards.
How can I measure the gauge of a wire?
If a wire isn't labeled, measure its diameter with calipers or a micrometer, then compare the measurement to an AWG chart. Be sure to measure the bare conductor rather than the insulation.
What is the difference between single build, heavy build, plain enamel, and heavy formvar enamel coatings?
Magnet wire is bare copper wire coated with insulation to prevent shorting of wound coils. The insulation comes in various thicknesses based on the needs of the product being wound. Single build is the standard, whereas heavy build adds double the amount of insulation to further protect the wire from shorting out. Plain enamel and heavy formvar insulations are used mainly in the guitar pickup industry, and closely resemble the enamel coating used in vintage instruments.
What is the temperature class of the wire?
The temperature class of magnet wire can range from 105°C to 240°C. Each temperature rating is suited to certain applications, with 155°C and 200°C being the most common. We stock 105°C, 155°C, 200°C, and 240°C magnet wire. Specifications for each are in our magnet wire data charts.
Are custom wire spools available?
Yes, we can wind spools based on your specifications of weight or length. All wire sizes are available as custom spools through our wire re-packaging service. Please contact us with your requirements, and we will respond as soon as we can.
What aluminum and stainless steel products do you stock?
We stock 6061 aluminum as flat bars, round rods, and angles, along with 304 stainless steel. Available sizes and specifications are listed in our aluminum data and stainless steel data charts. You can also browse all raw metals, or contact us about raw materials procurement for sizes we don't stock.
Are your products RoHS and REACH compliant?
Yes, our products are RoHS and REACH compliant. Full compliance information for our products is available on our RoHS / REACH data page, along with other environmental and safety statements. If you need documentation which is not listed on our website, please contact us.
Where can I find technical specifications for your products?
Our Resources page brings together wire gauge charts, ampacity data, and raw metal specifications in one place. It also includes cable assembly specifications and wire and cable management data for connectors, tubing, and more. Individual product pages also include downloadable data sheets.